To unlock the device, simply enter your unique 7-15 digit PIN.
Advanced data security via built-in AES-XTS 256-bit full disk hardware encryption engine.
Superfast backwards compatible USB 3.1 data transfer speeds.
Starting from £189
Up to 225 MB/s read speed.
Up to 223 MB/s write speed.
Employing AES-XTS 256-bit full disk hardware encryption, the diskAshur DT2 seamlessly encrypts all data on the drive
whilst at rest, keeping your data safe even if the hard drive is removed from its enclosure.
FIPS 140-2 Level 2/3, NCSC CPA, NLNCSA BSPA & NATO Restricted Level certified
(Enhanced Dual Generating Encryption) Uniquely featuring a dedicated on-board secure microprocessor (Common Criteria EAL4+ ready) to enhance security through true random number generation and built-in cryptography. The data encryption key is protected by FIPS and Common Criteria validated wrapping algorithms.
All the components of the diskAshur DT2 are completely covered by a layer of super tough epoxy resin, which is virtually impossible to remove without causing permanent damage to the components.
Which makes it perfect for corporate and government deployment. If the user forgets their PIN, the drive can be unlocked using the admin PIN, the administrator can then allow the user to set a new PIN.
No software required.
Works on any device with a USB port!
compatible with: MS Windows, macOS, Linux, Android, Chrome, Thin Clients, Zero Clients, Embedded Systems, Citrix and VMware
Incorrect PIN entry
The drive will freeze, requiring the drive to be disconnected and reconnected to the USB port to get a further five PIN entry attempts.
If the following five (10 in total) consecutive PIN attempts are entered incorrectly again, the diskAshur DT2 will freeze again. To get a further and final five PIN attempts (15 in total), the “shift” button must be pressed whilst inserting the USB cable to the USB port and then an iStorage preset PIN will need to be entered.
On the fifteenth consecutive incorrect PIN entry, the diskAshur DT2 assumes it is being attacked and will delete the encryption key and lock itself, rendering all data previously stored on the drive as lost forever. At this point the drive can be reset to factory default settings and redeployed.
The SHIFT key can be used for additional combinations. SHIFT + 1 is a separate value than just 1. To create a PIN using additional combinations, press and hold down the SHIFT button whilst entering your 7-15 digit PIN. e.g. SHIFT + 26756498.
You can pre-program the diskAshur DT2 with your own unique self-destruct PIN, which once implemented, instantly deletes the encryption key, all PINs, data and then creates a new encryption key.
The diskAshur DT2 automatically locks when unplugged from the host computer or power to the USB port is turned off and can also be set to automatically lock after a predetermined amount of time.
All data and encryption keys are always encrypted whilst at rest.
Designed with protection in mind, the diskAshur DT2 wear resistant epoxy coated keypad hides key usage to avoid tipping off a potential hacker to commonly used keys.
Designed with protection in mind, the diskAshur2 wear resistant epoxy coated keypad hides key usage to avoid tipping off a potential hacker to commonly used keys.
Super-Speed USB 3.1 - Abwärtskompatibel mit USB 1 / 2 / 3
1 TB 2 TB 3 TB 4 TB 6 TB 8 TB 10 TB 12 TB 14 TB 16 TB
MS Windows, macOS, Linux, Chrome, Android, Thin Clients, Zero Clients, Embedded Systems, Citrix and VMware
AES-XTS 256-bit full disk hardware encryption
FIPS PUB 197 Validated, CE, RoHS, WEEE, TAA compliant
12V AC adapter
Drive, universal mains adapter, USB cable and quick start guide
XXXX = capacity
*All listed capacities, within the diskAshur range is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products.